Laser Welding Machine - Where Quality Meets Innovation in Welding

• Customization: Available
• After-sales Service: Machine Warranty 1 Year, Laser Warranty 2 Years
• Warranty: Machine Warranty 1 Year, Laser Warranty 2 Years
• Laser Classification: Optical Fiber Laser
• Type: Portable Welding Machine
• Transport Package: Wooden Box
• Specification: L900*W420*H710mm
• Production Capacity: 5000 Pieces/Year

Product Description

Handheld laser welding is a new type of welding method, but also one of the important aspects of laser material processing technology application, laser welding is mainly for thin-wall materials, precision parts welding, welding process belongs to the heat conduction type, that is, laser radiation heating the surface of the workpiece, surface heat through the heat conduction to the internal diffusion. By controlling the width, energy, peak power and repetition frequency of the laser pulse, the workpiece is melted to form a specific molten pool.

The handheld laser welding machine replaces the traditional fixed optical path with a new generation of handheld welding head, which is flexible and convenient, overcoming the limitations of the workbench space and the situation that automatic welding cannot be performed when the work size is not uniform.

Materials	Material thicknessmm	Wire feed speed mm/s	Scanning speed mm/s	Sweep width mm	powerw	Duty cycle %	Pulse frequencyhz	Welding wire mm
Stainless steel	1mm	90mm/s	300mm	2.5mm	400W	100%	1000hz	1.0mm
Stainless steel	2mm	75mm/s	300mm	3.0mm	700W	100%	1000hz	1.2mm
Stainless steel	3mm	60mm/s	300mm	3.5mm	900W	100%	1000hz	1.6mm
Carbon steel	1mm	90mm/s	300mm	2.5mm	400w	100%	1000hz	1.0mm
Carbon steel	2mm	75mm/s	300mm	3.0mm	650w	100%	1000hz	1.2mm
Carbon steel	3mm	60mm/s	300mm	3.5mm	900w	100%	1000hz	1.6mm
aluminum	2mm	60mm/s	300mm	2.5mm	700w	100%	1000hz	1.0mm
aluminum	3mm	60mm/s	300mm	3.0mm	900w	100%	1000hz	1.2mm

Attention:
1, if welding 1mm stainless steel, set 30% power according to the welding speed. If the speed is fast, the weldability is good. If the welding is slow, perforation will occur. Therefore, if the material is thin, the power should be set smaller.
2, can not weld pure copper, no reaction, high light reflectivity, can not reach the melting point.

Common faults and troubleshooting measures

Common fault	Fault description and solution
The system cannot be powered on	1. If the whole machine cannot be powered on, check whether the power supply line of the machine is normal, and then check whether the circuit breaker, emergency stop, and power button are pressed. 2, check whether the self-locking relay is normal, if damaged, it can be replaced by itself or reported after sale.
Laser alarm	1. Whether the laser alarm is caused by the alarm at the water register, check whether the water tank is opened or the alarm is generated. 2. The QBHfth alarm is generated because the optical fiber head and collimation are loose. Need to report after-sales personnel to deal with. 3. The laser water reading cycle is blocked, the air is stored in the cooling water pipe, and the water circulation is checked in the hollow water pipe.
No light output	1, when the laser does not appear light, first check whether the laser is turned on, when the red light is emitted from the gun head, the laser has no alarm, and the enable light on the laser panel is lit. 2, the red light is not emitted from the gun head, the laser does not alarm, so that the lamp is normal, it may be damaged for the swinging lens, need to be replaced by after-sales personnel. 3, the red light is normally emitted from the gun head, the laser does not alarm, the enable light on the laser panel is not bright when the enable light is pressed, it may be the laser expires, you need to use the computer to connect the laser to check whether the laser control is evening control mode, in the input password can be. If the above are normal, check whether the safety lock on the touch screen is opened, and whether the gun head is connected to the ground wire when it is opened.
Laser weakening	1, when the laser becomes weak, first confirm whether the red light is emitted in the middle of the gun mouth. 2. Whether the protective lens is damaged and whether the protective gas is turned on. 3, whether to weld on the focus. 4, the above are normal, then the computer is connected to the laser real-time monitoring whether the current laser power and set power. 5, if the power setting is normal, you need to check the focusing mirror and optical fiber head for damage, which requires after-sales personnel to deal with.
Protective lens damageable	1. When the protective lens is damaged frequently during welding, check whether the gas is on first. 2. When the current power is adjusted to the maximum and the laser power is increased to more than 90%, it is recommended to use defocus welding to avoid excessive splash resulting in damage to the protective lens. 3. When welding, whether the gun head is welded between 0-65 degrees and the working surface, avoid laser and working 90® when welding aluminum alloy materials (special attention should be paid to it).
Water tank alarm	1. If the temperature is too high, the alarm will be generated. Turn off the power supply when it appears. 2, abnormal water flow leads to alarm, water flow alarm is generally caused by water pipe bending, you can see whether the water pipe is bent.